Operating instructions

51
Example
Determine the length of an amount of electrical cable after weighing in the defined reference unit value
Configure Settings
e Switch on the Combics
While all segments are lit, press the ) key
)
Display for selecting the application is shown
Open Application selection appl Symbol for Neutral Measurement: Z nm
Select Neutral Measurement
) (press and hold) Exit Application selection
Operation
Place empty container on the platform
) Tare the weighing platform
Press r (repeatedly, if necessary) to set the desired reference value (in this example, 2)
Operating the Combics 2
Combics 2
8
881
8888888
appl000
8
1
00
8
1
00