Operating instructions

47
Operating the Combics 2
Example
Determine piece count; menu setting: weigh in the defined reference sample quantity with the minimum load set to 100 digits
Configure Settings
Switch on the Combics
e
While all segments are lit, press the ) key
)
Display for selecting the application is shown
Open Application selection appl Symbol for Counting: Z
Select parameter 3.6.7 100 digits: Parameter 3.6.7
Press and hold
) Exit Application settings menu
Operation
Place empty container on the platform
) Tare the weighing platform
Press
r (repeatedly, if necessary) to set the desired reference sample quantity (in this example, 20)
8
881
8888888
appl000
8
01
00
8
01
00
Combics 2