Operating instructions

46
Preparation
§ Press the e key to switch on the
Combics
§ While all segments are lit, press the
) key
§ Open the numeric menu: Press the
) key twice
3 Application parameters
3.5 Minimum load for automatic taring
and automatic printing
3.5.1 1 digit
3.5.2 2 digits
3.5.3 5 digits
3.5.4 10 digits
3.5.5 20 digits
3.5.6 50 digits
3.5.7 100 digits
3.5.8 200 digits
3.5.9 500 digits
3.5.10 1000 digits
3.6 Minimum load for automatic
initialization
3.6.1 1 digit
3.6.2 2 digits
3.6.3 5 digits
3.6.4 10 digits
3.6.5 20 digits
3.6.6 50 digits
3.6.7 100 digits
3.6.8 200 digits
3.6.9 500 digits
3.6.10 1000 digits
3.7 Automatic taring (first weight tared)
3.7.1 Off
3.7.2 On
3.8 Application started automatically with
most recent initialization data when
Combics switched on
3.8.1 On (automatic start)
3.8.2 Off (manual start)
3.9 Resolution for calculation of
reference value
3.9.1 Display resolution
3.9.2 Display resolution + 1
3.9.3 Display resolution + 2
3.9.4 Internal resolution
3.11 Storage parameter
3.11.1 At stability
3.11.2 At higher stability
3.12 Reference sample updating
3.12.1 None
3.12.2 Automatic
3.13 Reference platform
3.13.1 Off
3.13.2 WP1
3.13.3 WP2
§ Save settings and exit Setup: Press and
hold the ) key