Operating instructions

41
Example
External calibration and manual adjustment with default weights
Settings in the Setup menu: Please see the "Preparation" section on the previous page
1.9.1; 1.10.2; 1.16.1
( Unload and zero the weighing platform
Press and hold
) Start calibration (e.g., when calibration prompt flashes: W)
This is displayed for 2 seconds
If the setting Setup: utilit.: 8.12.2 is selected, the display now shows ALTITUD
for 1 second, followed by the corresponding value. Press ) to confirm; then
LATITUD is displayed for 1 second followed by the value. If the gravitational
acceleration has been entered as a valid parameter, then this value is displayed rather
than the altitude and latitude.
You are prompted to place the required weight on the platform (e.g., 10 kg)
Position the calibration weight on the weighing platform
The difference between the weight value and the true mass is displayed, with O sign.
External calibration
Targ. + 50.00 lb If you press ( to cancel calibration without performing adjustment, a printout is generated
Diff. - 0.01 lb
----------------------
) Activate adjustment (press the ( key to cancel calibration/adjustment)
The calibration weight is displayed at the conclusion of adjustment
Continued on next page
cal000
Combics 2