Operating instructions

30
datprot Data protocol
sbi * SBI standard version
5. 3. Number of stop bits
5. 3. 1 * 1 stop bit
5. 3. 2 2 stop bits
5. 4. Handshake mode
5. 4. 1 Software handshake
5. 4. 3 * Hardware handshake, 1character after CTS
5. 6. Number of data bits
5. 6. 1 * 7 data bits
5. 6. 2 8 data bits
6. 1. Manual/automatic data output
6. 1. 1 Manual without stability
6. 1. 2 * Manual with stability
6. 1. 4 Automatic without stability
6. 1. 5 Automatic with stability
6. 1. 7 Printout for computer (PC)
6. 3. Automatic printout of data output
6. 3. 1 * 1 display update
6. 3. 2 2 display updates
6. 3. 4 10 display updates
6. 3. 7 100 display updates
7. 2. Data output: Line format for printout
7. 2. 1 For raw data: 16 characters
7. 2. 2 * For other applications: 22 characters
9. 1. Restore factory settings
of the numeric menu for COM1: SBI
9. 1. 1 Yes
9. 1. 2 * No
bpi-232 xBPI-232
mp8 “MP8 interface" emulation
Prog Program selection
p 3-1-1 MP8: 3-1-1
...
p 3-1-9 MP8: 3-1-9
p 3-2-1 MP8: 3-2-1
...
p 3-2-9 MP8: 3-2-9
p 3-3-1 MP8: 3-3-1
...
p 3-3-9 MP8: 3-3-9
ind. 2 Index 2
1 2 . 1 Ind. 2.1
1 2 . 2 Ind. 2.2
1 2 . 3 Ind. 2.3
1 2 . 4 Ind. 2.4
baud Baud rate
5. 1. 1 150 baud
5. 1. 2 300 baud
5. 1. 3 600 baud
5. 1. 4 * 1200 baud
5. 1. 5 2400 baud
5. 1. 6 4800 baud
5. 1. 7 9600 baud