Operating instructions

24
O CL Classification
4.10. Automatic printout of results
4.10. 1 * Off
4.10. 2 On
9. 1. Restore factory settings of all application programs
9. 1. 1 Yes
9. 1. 2 * No
L Weighing in Percent
3. 5. Minimum load for automatic taring and automatic printout
3. 5. 1 1 digit
3. 5. 2 2 digits
3. 5. 3 5 digits
3. 5. 4 * 10 digits
3. 5. 5 20 digits
3. 5. 6 50 digits
3. 5. 7 100 digits
3. 5. 8 200 digits
3. 5. 9 500 digits
3. 5.10 1000 digits
3. 6. Minimum load for initialization
3. 6. 1 * 1 digit
3. 6. 2 2 digits
3. 6. 3 5 digits
3. 6. 4 10 digits
3. 6. 5 20 digits
3. 6. 6 50 digits
3. 6. 7 100 digits
3. 6. 8 200 digits
3. 6. 9 500 digits
3. 6.10 1000 digits
3. 7. Automatic tare: 1st weight tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Application started automatically and most recent application data loaded
when Combics switched on
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
3. 9. Resolution for calculation ot the reference value
3. 9. 1 * Display resolution
3. 9. 2 Display accuracy + 1 decimal place
3. 9. 3 Display accuracy + 2 decimal places
3. 9. 4 Internal resolution
3.10. Decimal places for display of percentage
3.10. 1 * None
3.10. 2 1 decimal place
3.10. 3 2 decimal places
3.10. 4 3 decimal places
3.11. Storage parameter
3.11. 1 * With stability
3.11. 2 With higher stability
3.13. Reference scale
3.13. 1 * Off
3.13. 2 To weighing platform WP-1
3.13. 3 To weighing platform WP-2
3.15. Display of calculated value
3.15. 1 * Residue
3.15. 2 Loss