Operating instructions

23
O Checkweighing
4. 5. Parameter input
4. 5. 1 * Min, max, target
4. 5. 2 Only target with percentage limits
4. 6. Automatic printout of results
4. 6. 1 * Off
4. 6. 2 On
4. 6. 3 Only OK values
4. 6. 4 Only not-OK values
9. 1. Restore factory settings of all application programs
9. 1. 1 Yes
9. 1. 2 * No
O CL Classification
3. 5. Minimum load for automatic taring and automatic printout
3. 5. 1 1 digit
3. 5. 2 2 digits
3. 5. 3 5 digits
3. 5. 4 * 10 digits
3. 5. 5 20 digits
3. 5. 6 50 digits
3. 5. 7 100 digits
3. 5. 8 200 digits
3. 5. 9 500 digits
3. 5.10 1000 digits
3. 6. Minimum load for setting the lower limit for “class 1”
3. 6. 1 * 1 digit
3. 6. 2 2 digits
3. 6. 3 5 digits
3. 6. 4 10 digits
3. 6. 5 20 digits
3. 6. 6 50 digits
3. 6. 7 100 digits
3. 6. 8 200 digits
3. 6. 9 500 digits
3. 6.10 1000 digits
3. 7. Automatic tare: 1st weight tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Application started automatically and most recent application data loaded
when Combics switched on
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
4. 3. Activate control line for “Set" as:
4. 3. 1 * Set output
4. 3. 2 Ready to operate
4. 7. Activate output ports
4. 7. 1 Off
4. 7. 2 Always activated
4. 7. 3 * Activate at stability
4. 8. Number of classes:
4. 8. 1 * 3 classes
4. 8. 2 5 classes
4. 9. Parameter input
4. 9. 1 * Weight values
4. 9. 2 Percentage