Operating instructions

22
V Averaging (Animal Weighing)
3.19. Animal activity
3.19. 1 0.1 % of the animal/object
3.19. 2 * 0.2% of the animal/object
3.19. 3 0.5 % of the animal/object
3.19. 4 1% of the animal/object
3.19. 5 2% of the animal/object
3.19. 6 5% of the animal/object
3.19. 7 10% of the animal/object
3.19. 8 20% of the animal/object
3.19. 9 50% of the animal/object
3.19.10 100 % of the animal/object
3.20. Automatic printout
3.20. 1 * Off
3.20. 2 On
3.21. Display of results static after unloading platform
3.21. 1 * Fixed display until unload threshold reached
3.21. 2 Fixed display until w key pressed
9. 1. Restore factory settings of all application programs
9. 1. 1 Yes
9. 1. 2 * No
O Checkweighing
3. 5. Minimum load for automatic taring
3. 5. 1 1 digit
3. 5. 2 2 digits
3. 5. 3 5 digits
3. 5. 4 * 10 digits
3. 5. 5 20 digits
3. 5. 6 50 digits
3. 5. 7 100 digits
3. 5. 8 200 digits
3. 5. 9 500 digits
3. 5.10 1000 digits
3. 7. Automatic tare: 1st weight tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Application started automatically and most recent application data loaded
when Combics switched on
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
4. 2. Checkweighing range
4. 2. 1 * 30 to 170%
4. 2. 2 10% to unlimited
4. 3. Activate control line for “Set" as:
4. 3. 1 * Set output
4. 3. 2 Ready to operate
4. 4. Activate output ports
4. 4. 1 Off
4. 4. 2 Always activated
4. 4. 3 Activate at stability
4. 4. 4 * Activate when within checkweighing range
4. 4. 5 Activate at stability and when within checkweighing range