Operating instructions

13
Display During the Weighing Mode
(Example)
1 Symbol for the routine in progress
2 O sign for the value displayed
3 Indicates that the weighing platform
has been zeroed
4 Weight or calculated value
(main display)
5 This digit is not valid when the
equipment is used in legal metrology
6 Weight unit of the value displayed
7 GMP printing mode active
8 Data in tare memory
9 Gross value shown in main display
10 Printing mode active
11 R1, R2 for multiple range mode
12 Active weighing platform
(Combics 2 only)
13 Bar graph
14 Program symbols
(for checkweighing, classification)
15 Application symbols (Combics 2 only)
16 Auto: Reaction of application
program triggered by weight value;
Opt: Reference sample updating was
performed
17 Numeric display (e.g., reference value)
18 Battery symbol
Menu Display (Example)
1 Selected menu item (in this example,
"Printer," for configuring the
connected printer)
2 Indicates that the menu has
submenu(s)
3 Indicates that this is the currently
selected setting
4 Highest menu level
2
01
printer
1 32 4
2
01
124853
21 3
13
4 5 6 87 109 11 12
1516 171514
Display Modes
There are two display modes: one used
during weighing and one when working
with the operating menu.
Display During the Weighing Mode
The illustration above shows all of the
main display elements and symbols
shown during weighing.
Display of the Operating Menu
Weighing parameters are set by
selection of menu items. The menus
have a hierarchical structure comprising
several levels. The first level shows
abbreviations indicating:
– Application (appl) (Combics 2 only)
– Current function of Fn key (fn-key)
– Information (info)
– Setup (setup)
– Language (lang)
Some of the parameters are configured
according to number code. For details
on these number codes, see the chapter
entitled “Settings.”
Saving Data
The parameters you select in the
operating menu remain stored after
you turn off the Combics.
Combics 2 only: All of the application
parameters stored (e.g., reference value)
are available when you turn the
Combics on again. These parameters
are overwritten only when
– you turn off the Combics first, then
back on again
– you return to the originally selected
application from a different one
(such as from counting to averaging;
when you switch back to counting,
the parameters previously saved for
counting are available again).
You can restrict access to the Setup
menu by assigning a password. The
password is configured in the Setup
program, under: Setup Password
Deleting Data
Changing a Single Character
Press ( or ) to activate the desired
character and then press k or p to
change it.
Deleting Characters
You can delete an entire group of
characters (such as the password) by
pressing the p key, if the cursor is on
the first character and you have not
yet made any changes.
Then you can exit the data input mode
(press ) twice or hold this key down
for more than 2 sec.) or enter a new
group of characters.
Cancel Data Input
Press the ( key repeatedly until you
exit the data input mode or press the
( key for more than 2 sec.
Clearing the Memory
Press c to delete stored initialization
data.