Operating instructions

127
Product Order No.
Retainer for bar code scanner, for attachment to floor-
mounted column, bench stand or complete scale retainer YBH01CWS
Plates for attaching printer to floor-mounted
column or bench stand YPP01CWS
Castor set (2 guide castors, 2 lockable castors) for
YBP03CIP/S bench stand YRO03CI
Anti-theft device YTP01CI
24V industrial power supply module* YAS02CI
Connecting cable (25-pin D-SUB) for YRB10Z
battery pack (2m) YCC02-RB01
Connecting cable with cable gland for YRB10Z
battery pack (2m)
(for Combics models CIS only) YCC02-RB02
Connecting cable (25-pin D-SUB) for car battery (2 m) YCC02-CB01
Connecting cable with cable gland for car battery für (2m)
(for Combics models CIS only) YCC02-CB02
Connecting cable with cable gland for YBR02FC
bar code scanner (for Combics models CIS only) YCC02-BR02
Connecting cable with cable gland 9-pin D-SUB
male connector, 6m (for Combics models CIS only) YCC02-D09M6
Connecting cable with cable gland, 9-pin D-SUB
female connector, 6m (for Combics models CIS only) YCC02-D09F6
Connecting cable with cable gland, 25-pin D-SUB
female connector, 6m (for Combics models CIS only) YCC02-D25F6
Connecting cable with cable gland, 12-pin round
male connector, 6m (for Combics models CIS only) YCC02-R12M6
Connecting cable with cable gland, 12-pin round
female connector, 6m (for Combics models CIS only) YCC02-R12F6
Cable for YDA01C-20MA power interface,
with open cable ends e.g., 5 + = 5m* 6906926
Cable gland for Combics model CIS, IP65/67 protected
(for Combics models CIS only) YAS04CIS
Connecting an IS Weighing Platform to a Combics 2 Indicator
You can connect an IS weighing platform as WP2.
Characteristics:
– IS weighing platforms process weighing data independently
of the indicator
– IS platforms can be internally adjusted
– …-0CE models have a separate approval number, on a tag
affixed to the cable
– Please observe the conditions described in the instruction
manual for the platform connected
* not for use in legal metrology