Operating instructions

11
Keys Below the Display
On/off
Turns the Combics on or off.
When the Combics is turned off,
off is displayed.
Toggling the display between
weighing platforms (Combics 2 only)
When two weighing platforms are
connected, this key toggles the
display between the platforms.
Not for legal for trade
During weighing:
– If you press the key for less than
2 sec: this will zero the indicator
– If you press the key longer thans
2 sec: The audit trail counter will be
displayed
In the operating menu:
Exit the current menu level and
display the next higher level (unless
you are already at the uppermost
level)
During alphanumeric input in
the operating menu:
– Press briefly:
Activate the character to the left
of the currently active character
(When the first character is active:
Exit the input mode without saving
changes)
– Press and hold:
Exit the input mode without saving
changes
During weighing:
– Press briefly:
Tare the weighing platform
– Press and hold:
Activate calibration/adjustment
In the operating menu:
– Press briefly:
Display the next lower menu level or
Select and store a menu item
– Press and hold:
Exit the operating menu
During alphanumeric input in
the operating menu:
– Press briefly:
Activate the character to the right
of the currently active character
(when the last character is active:
store current input)
– Press and hold:
Store current input and display the
corresponding menu item
During weighing:
Toggle the display, depending
on menu settings, to:
– 1st, 2nd and 3rd weight unit
(these cycle in the display)
– gross/net, or
– 10 x higher display resolution
In the operating menu:
Show the next value on the same
menu level (the display scrolls in
one direction)
During alphanumeric input in the
operating menu:
– If the cursor is on the 1st character
and you have not changed it: this
deletes the line of characters and
inputs a 0
– If you have changed the displayed
character; scroll forward (sequence:
0 to 9; decimal point; minus sign;
Z to A; space)
During weighing:
– Press briefly: Print
– Press and hold: Print GMP footer
In the operating menu:
Print the menu settings starting
from the active menu location,
or print info data
During alphanumeric input in the
operating menu:
– If the cursor is on the 1st character
and you have not changed it: this
deletes the line of characters and
inputs a 0
– If you have changed the displayed
character; scroll back (sequence:
space; A to Z; minus sign; decimal
point; 9 to 0 )
Operating Elements: Combics 1 (Combics 2: see next page)