User's Manual

6. Name and Title of Each Part

6-1. Front

1. POWER LED: If users press the “I/O” switch from the main frame, power will be supplied and the

power lamp will be lightened up.

2. HDD LED: The hard disk lamp will lightened up when the hard disk activates.

3. NTSC LED: It will be lightened up when the TV method is set as NTSC state.

4. PAL LED: It will be lightened up when the TV method is set as PAL state.

5. PLAY LED: It will be lightened up when the movie, music or picture is played.

6. UP/DOWN SWITCH: Users can use this switch to move the subtitle location and menu item up and

down.

7. LEFT/RIGHT SWITCH: Users can use this switch to play the screen forward/backward rapidly or

move the menu item right and left.

8. SELECT SWITCH: If users press either the movie play button or the menu selection button, it will be

played. If users press it once again, it will go back to the menu item.

9. I/O SWITCH: This is a power on/off switch.

- ON: If users press the “I/O” switch one time with the switch off, power will be turned on.

- OFF: If users press the “I/O” switch for about two seconds with the switch on, power will be turned

off after about three seconds.

10. REMOTE CONTROL RECEIVER: This is a receiver of remote control signals. Remote control signals

will be received correctly if the remote control activates while facing the front side of abigs main frame.