User's Manual

8. Connection to PC

The following teaches how to connect abigs to external storage equipment and use it.

Consider watching a movie in connection with the external TV while abigs is activating. If users

connect the USB cable, it will activate as external storage equipment. As a result, users cannot see the

screen from the external TV. If users want to end the use of external storage equipment and watch the

movie again, turn off the power, remove the USB cable and turn on the power again. If abigs doesn’t

activate, connect the USB cable so that abigs can automatically activate as external storage equipment.

If users remove the USB cable, the power will be automatically turned off.

* Warnings

Please turn on the power before using the external storage equipment in connection with the PC.

Sometimes, abigs doesn’t activate with a USB power depending on the hard disk. In this case, the

hard disk can be damaged.

8-1. Hard Disk FDISK and Format

1. A new hard disk, which is assembled on abigs, cannot be automatically recognized. In this case, it

is necessary to conduct FDISK and Format work. Refer to the file,

“/FDISK&FORMAT/fdisk&format(ENG).pdf” in the provided CD. Download is possible from the abigs

website. (http://www.sarotech.com)

2. Set the partition information as “Main Partition(P)”. If users set the partition information as logical

partition or extended partition, the movie cannot be played in connection with the TV.

* Reference

Hard Disk 2 Partition Support

Support two partitions. If there are two partitions, the first one is expressed as /hd1/ and the second

one as /hd2/. If there is one partition, /hd1/ becomes the top level folder.

8-2. During the use of Windows ME/2000/2003/XP

It is automatically recognized in Windows without a separate driver.

■ Connecting

1. Connect power to the product.