User's Manual

Assembly Instructions
a
The Hub
SKU #H1000
PARTS LIST
b
c
1 Scanning Box
Double-Sided Velcro Mounting Strips
1 Power Supply
d
150 Scanning Cards
Ride. Scan. Earn. Rewarding Active Transport.
HUB
THE
Brought to you by Saris Cycling Group
HUB
THE
Brought to you by Saris Cycling Group
Swipe card here
Ride. Scan. Earn. Rewarding Active Transport.
HUB
THE
Brought to you by Saris Cycling Group
Powered by:
Ride. Scan. Earn. Rewarding Active Tra
nsport.
HUB
THE
Brought
to you
by Saris Cycling Group
Powered by:
Ride. Scan. Earn. Rewarding Active Transport.
HUB
THE
Brought to you by Saris Cycling Group
Powered by:
ng
-Sid
r Su
Ride. Scan. Earn. Rewarding Active Transport.
Brought to you by Saris Cycling Group
Brought to you by Saris Cycling Group
-Sided Velcro Mounting
Supply
INITIAL SOFTWARE SET UP
Ride. Scan. Earn. Rewarding Active Transport.
HUB
THE
Brought to you by Saris Cycling Group
HUB
THE
Brought to you by Saris Cycling Group
Swipe card here
Ride. Scan. Earn. Rewarding Active Transport.
HUB
THE
Brought to you by Saris Cycling Group
HUB
THE
Brought to you by Saris Cycling Group
Swipe card here
LIGHT DEFINITIONS
POWER – Green indicates power is successfully running to the box
NETWORK CONNECTION– Amber light pulses during set up. If light is on, no network connection
was made.
ATTENTION – Red light; if ashing, no connection with card reader.
SCAN INDICATION – Green light. Pulses 2x to indicate successful scan of card
SWIPE CARD HERE- Indicates location of card swipe. Aim card for this target for successful scan
FRONT OF BOX
BOTTOM OF BOX
HARDWARE SET UP
It is recommended that The Hub scanner box be located as close to your
bike parking as possible and mounted at shoulder height. The box requires
an indoor location with access to power (power cord supplied) and Ether-
net (data cable NOT supplied) connections. Standard 110 volt is sucient
for the system. The system will have adhesive strips to be attached to any
wall surface, and does not require any hardware drilled into the wall.
1
1.1 MOUNTING
The Hub
Designed in Madison, WI
Made in the USA
Saris Cycling Group, Inc.
Model #: NFC RFID1
FCC ID: T8P-RFID1
IC: 6459A-RFID1
POWER CORD OUTLET
ETHERNET CORD OUTLET
Service 2Service 1
Ride. Scan. Earn. Rewarding Active Transport.
HUB
THE
Brought to you by Saris Cycling Group
HUB
THE
Brought to you by Saris Cycling Group
Swipe card here
4’
Power
Ethernet
NETWORK CONFIGURATION ONLY
NETWORK CONFIGURATION ONLY
http://thehub.saris.com
Prior to installing your Hub hardware, follow the link to
http://thehub.saris.com/TheHub/initialSetup.aspx
to register your organization and create your administrator log in and
prole.
e
1 Ferrite Clamp