Manualshelf

User Manual

ManualsBrandsSaris Cycling Group ManualsElectronicsBicycle Monitoring Transmitter
21222324252627282930
Joule 2.0 User Guide page 58
Joule 2.0 User Guide page 59
Chapter 7: Setting Up CycleOps Joule 2.0
Setting Up Display
Joule 2.0 display can be customized for viewing preferences. PowerAgent software may also be
used to change settings.
1. Press and release the [MODE] button until Menu mode is displayed.
2. Press [JOYSTICK] up/down to highlight Setup Joule. Press [JOYSTICK] in and release to select Setup Joule.
3. Press [JOYSTICK] up/down to highlight Display. Press [JOYSTICK] in and release to select Display.
4. Press [JOYSTICK] up/down to highlight Backlight Level. Press [JOYSTICK] in and release to select Backlight
Level.
5. Press [JOYSTICK] up/down to change Backlight Level from 1-10. Press [JOYSTICK] in and release to save
settings. Note: Backlight Level10 is the brightest level, 1 is the dimmest. Press [JOYSTICK] in and release to save
changes.
6. Press [JOYSTICK] up/down to highlight Backlight Timeout. Press [JOYSTICK] in and release to select Back-
light Timeout.
7. Press [JOYSTICK] up/down to change Backlight Timeout from Off, 2 seconds, 5 seconds, 30 seconds, 1 minute
or On. Note: the backlight will turn on after any button is pressed and remain on for the duration of the Back-
light Timeout setting. Press [JOYSTICK] in and release to save changes.
8. Press [JOYSTICK] up/down to highlight Contrast. Press [JOYSTICK] in and release to select Contrast.
9.Press [JOYSTICK] up/down to change Contrast from 1-10. Press [JOYSTICK] in and release to save settings.
Note: Contrast setting 1 offers little distinction between black and white shades while setting 10 offers greater
distinction between black and white shades. Press [JOYSTICK] in and release to save changes.
10. Press JOYSTICK up/down to highlight Power Smoothing. Press [JOYSTICK] in and release to select Power
Smoothing.
11. Press [JOYSTICK] up/down to change Power Smoothing from 1, 2,3,5,10,30. Press [JOYSTICK] in and release to
save settings. Note: Power smoothing 1 displays power data as it is sent from the power sensor, Power smooth-
ing 30 displays power data as a 30 second rolling average which can be used for better pacing during intervals
and races. Press [JOYSTICK] in and release to save changes.
12. Press [JOYSTICK] up/down to highlight Power With Zeros. Press [JOYSTICK] in and release to select Power
With Zeros.
13. Press [JOYSTICK] up/down to change Power With Zeros from Yes to No. Press
[JOYSTICK] in and release to save settings. Note: Power With Zeros set to Yes will
calculate all average power data with zeros included, Power With Zeros set to No
will calculate all average power data without zeros or only when pedaling. Press
[JOYSTICK] in and release to save changes.
14. Press [JOYSTICK] up/down to change Cadence Smoothing from 1,
2,3,5,10,30. Press [JOYSTICK] in and release to save settings. Note: Cadence
Smoothing 1 displays cadence data as it is sent from the cadence sensor, Ca-
dence Smoothing 30 displays cadence data as a 30 second rolling average which
can be used for better pacing during intervals and races. Press [JOYSTICK] in and
release to save changes.
15. Press [JOYSTICK] up/down to highlight Cadence With Zeros. Press [JOY-
STICK] in and release to select Cadence With Zeros.
16. Press [JOYSTICK] up/down to change Cadence With Zeros from Yes to No.
Press [JOYSTICK] in and release to save settings. Note: CadenceWith Zeros set
to Yes will calculate all average cadence data with zeros included, Cadence With
Zeros set to No will calculate all average cadence data without zeros or only
while pedaling. Press [JOYSTICK] in and release to save changes.
17. Press [JOYSTICK] up/down to change Speed Smoothing from 1, 2,3,5,10,30.
Press [JOYSTICK] in and release to save settings. Note: Speed Smoothing 1
displays speed data as it is sent from the speed sensor, Speed smoothing 30
displays speed data as a 30 second rolling average which can be used for bet-
ter pacing during intervals and races. Press [JOYSTICK] in and release to save
changes.
Chapter 7: Setting Up CycleOps Joule 2.0
Setting Up Display...continued
Workouts
>
History
>
PowerTest
>
Preferences
>
CPU Setup
>
Sensors
>
Main
>
Exit Menu
<
Report
Menu
INT
Main
Workouts
>
History
>
PowerTest
>
Preferences
>
Setup
>
Sensors
>
Main
>
Exit Menu
<
Report
Menu
INT
Main
Backlight Level
1 - 10
Backlight Time (sec):
Off, 2, 5, 30, 60, On
Contrast:
1 - 10
Zero averaging:
With,Without
Power Avg (sec):
1, 2, 3, 5, 10, 30
Cadence Avg (sec):
1, 2, 3, 5, 10, 30
Speed Avg (sec):
1, 2, 3, 5, 10, 30
Units:
English, Metric
CRecord Control:
Speed, HRM
Sleep Time:
1-5
Frequency
000 - 124
Power:
0-3
End Ride Time (min):
15,30,90,Never
Date:
Jan/Feb/Mar...
Time:
XX:XX am/pm
Clock Format:
12/24
OK
>
Date & Time
>
>
Display
>
Memory
>
CPU Mode
>
CPU Data
>
CPU Data
>
XXX
>
Automatic DST:
>
On
>
Back
<
Report
Menu
INT
CPU Setup
OK
>
Date & Time
>
>
Display
>
Memory
>
CPU Mode
>
CPU Data
>
CPU Data
>
XXX
>
Automatic DST:
>
On
>
Back
<
Report
Menu
INT
CPU Setup
OK
>
Date & Time
>
>
Display
>
Memory
>
CPU Mode
>
CPU Data
>
CPU Data
>
XXX
>
Automatic DST:
>
On
>
Back
<
Report
Menu
INT
CPU Setup
OK
>
Date & Time
>
>
Display
>
Memory
>
CPU Mode
>
CPU Data
>
CPU Data
>
XXX
>
Automatic DST:
>
On
>
Back
<
Report
Menu
INT
CPU Setup
Are you sure?
>
Date & Time
>
>
Ye s
>
No
>
CPU Mode
>
CPU Data
>
CPU Data
>
XXX
>
Automatic DST:
>
On
>
Back
<
Report
Menu
INT
Clear Ride Memory
Date:
>
Feb 26 2009
Time:
Clock Format:
12
>
Automatic DST:
>
On
>
DST Effective:
>
On
>
Clock Format:
>
>
12
Units
>
English
>
The Gun Show
>
Auto Zero
>
>
P
HR Zones
>
Pair New Sensor
>
Back
<
Report
Menu
INT
Date & Time
User
>
CPU
>
Heart Rate Sensor
>
RU Sensor
>
Speed Sensor
>
Back
<
Report
Menu
INT
Setup
04:55 pm
Backlight Level:
>
2
Backlight Time (sec):
Contrast:
5
>
Zero averaging:
>
With
>
Power Avg (sec):
>
1
>
Cadence Avg (sec):
>
>
1
Speed Avg (sec):
>
1
>
Language:
>
English
>
Units:
>
English
>
Pair New Sensor
>
Back
<
Report
Menu
INT
Display
10
End Ride Time (min):
>
90
Clear Memory
Clear Ride Memory
>
90
>
Power Avg (sec):
>
1
>
Power Zeros:
>
With
>
Cadence Avg (sec):
>
>
1
Units:
>
English
>
Pair New Sensor
>
Back
<
Report
Menu
INT
Memory
5
End Ride Time (min):
>
90
Clear Memory
Clear ride memory
>
90
>
Power Avg (sec):
>
1
>
Power Zeros:
>
With
>
English
>
English
>
Back
<
Report
Menu
INT
Memory
5
OK
>
Date & Time
>
>
Display
>
Memory
>
CPU Mode
>
CPU Data
>
CPU Data
>
XXX
>
Automatic DST:
>
On
>
Back
<
Report
Menu
INT
CPU Setup
OK
>
Date & Time
>
>
Display
>
Memory
>
CPU Mode
>
CPU Data
>
Test Mode
>
XXX
>
Automatic DST:
>
On
>
Back
<
Report
Menu
INT
CPU Setup
>
Record Control
>
Sleep Time:
1
>
Power Avg (sec):
>
1
>
Power Zeros:
>
With
>
Cadence Avg (sec):
>
>
1
Speed Avg (sec):
>
1
>
Language:
>
English
>
Units:
>
English
>
Pair New Sensor
>
Back
<
Report
Menu
INT
CPU Mode
Speed
Firmware Version:
>
01:00
Odometer
Reset Odometer
90
>
Power Avg (sec):
>
Designed in:
>
Madison,WI by
>
Saris Cycling Group
>
800-783-7257
>
>
1
Speed Avg (sec):
>
1
>
Language:
>
English
>
Units:
>
English
>
Pair New Sensor
>
Back
<
Report
Menu
INT
CPU Data
512356
OK
>
Date & Time
>
>
Display
>
Memory
>
CPU Mode
>
CPU Data
>
Test Mode
>
XXX
>
Automatic DST:
>
On
>
Back
<
Report
Menu
INT
CPU Setup
Frequency
>
057
Power
End Ride Time (min):
Start Radio Test
>
Stop Radio Test
>
Designed in:
>
Madison,WI by
>
Saris Cycling Group
>
800-783-7257
>
Units:
>
English
>
Pair New Sensor
>
Back
<
Report
Menu
INT
Test Mode
3
Workouts
>
History
>
Setup User
>
Setup CPU
>
Sensors
Sensors
>
Main
>
Exit Menu
<
Report
Menu
Main
>