User Manual

Joule 2.0 User Guide page 50
Joule 2.0 User Guide page 51
Setting Up Speed Sensors
Joule 2.0 is compatible with ANT+ speed sensors, each having a unique code. Joule 2.0 needs to
be paired to each sensor to ensure proper functionality. Once set up, sensors can be managed
using PowerAgent software.
1. Press and release the [MODE] button until Menu mode is displayed.
2. Press [JOYSTICK] in and release to select Sensors.
3. Press [JOYSTICK] up/down to highlight Speed Sensor. Press [JOYSTICK] in and release to select Speed
Sensor.
4. Press [JOYSTICK] up/down to highlight Add New Sensor. Press [JOYSTICK] in and release to select Add New
Sensor.
5. Make sure the Speed Sensor is awake and isolated from other active sensors by 65 feet/20 meters. Note: For
most Speed Sensors, rotating the wheel will wake up the sensor.
6. Press the [JOYSTICK] in and release to Start Pairing. Pairing may take up to 60 seconds. Once pairing is suc-
cessful, the sensor ID will be displayed.
7. Press [JOYSTICK] up/down to highlight Name. Press [JOYSTICK] in and release to select Name and change
the name of the paired speed sensor. Press [JOYSTICK] in and release to save changes.
8. Press [JOYSTICK] up/down to highlight the Wheel Circumference and press [JOYSTICK] in and release to
select wheel circumference. For a list of common wheel circumferences see FAQ section.
9. Press [JOYSTICK] up/down to highlight Activate Sensor. Press [JOYSTICK] in and release to Activate Sensor.
Note: active sensor is designated by a hash mark next to the sensor name in the sensor list. When switching
speed sensors, be sure to activate the appropriate sensor.
10. Once a sensor has been paired and activated Joule 2.0 will automatically find the active sensor whenever it
is turned on.
Chapter 6: Sensors
Setting Up Heart Rate Sensors
Joule 2.0 is compatible with ANT+ heart rate sensors, each having a unique code. Joule 2.0 needs
to be paired to each sensor to ensure proper functionality. Once set up, sensors can be managed
using PowerAgent software.
1. Press and release the [MODE] button until Menu mode is displayed.
2. Press [JOYSTICK] in and release to select Sensors.
3. Press [JOYSTICK] up/down to highlight Heart Rate Sensor. Press [JOYSTICK] in and release to select Heart
Rate Sensor.
4. Press [JOYSTICK] up/down to highlight Add New Sensor. Press [JOYSTICK] in and release to select Add New
Sensor.
5. Make sure the Heart Rate Sensor is being worn and isolated from other active sensors by 65 feet/20 meters.
6. Press the [JOYSTICK] in and release to Start Pairing. Pairing may take up to 60 seconds. Once pairing is suc-
cessful, the sensor ID will be displayed.
7. Press [JOYSTICK] up/down to highlight Name. Press [JOYSTICK] in and release to select Name and change
the name of the paired heart rate sensor. Press [JOYSTICK] in and release to save changes.
8. Press [JOYSTICK] up/down to highlight Activate Sensor. Press [JOYSTICK] in and release to Activate Sensor.
Note: active sensor is designated by a hash mark next to the sensor name in the sensor list. When switching
heart rate sensors, be sure to activate the appropriate sensor.
9. Once a sensor has been paired and activated Joule 2.0 will automatically find the active sensor whenever it is
turned on.
Chapter 6: Sensors