User's Manual

6
1. Turn on the Bluetooth from iPad/Smart Phone.
2. Turn on the Bluetooth Remote controller power
and press the “
” button. (Please make sure the
blue LED is flashing)
3. The device ”Bluetooth Remote controller”
displays on iPad/Smart Phone. Then, choose
“Connect”.
4. Start to use Bluetooth Remote controller.
Note: 1. There is a switch at top of the Bluetooth
Remote controller to switch between
Media mode and Presentation mode.
2. There is a power switch at bottom of the
Bluetooth Remote controller. When not in
use, please turn to OFF to save battery
power
.
3. After 30 minutes non-operation, the
Bluetooth Remote controller will go to
low-power mode. Please press any key to
wake up and wait the blue LED turn off
before using.
4. Please charge the battery before using
until the red LED turn off.
Key function description: Media mode