User's Manual

S/N
RD-WI-A.1-001
Revision
V1.0
ST-X3TWCPM & ST-X3TWCPS 三合一 使用
Page
1OF5
Gopod Group Ltd 2019-08-10 RD-WI-A.1-001 Barry Song
7：The power input (type-c interface) supports max current of 3000mA.
3.3：Indicator light function description
3.3.1: When 5V, 9V, 12V and 15V are input and powered on, the indicator light will display white for 3 seconds.
3.3.2: When 5V, 9V, 12V, 15V are input, the indicator will display the color when charging. When 5W, 7.5w,
and 10W are charged, they will all display white.
3.3.3: FOD indicator light shows white when 5V, 9V, 12V, 15V are input, and the LED flashes when FOD,
and the flashing speed is 1Hz.
3.3.4: Take away the mobile phone LED prompt during charging. Keep the white LED light on for 10 seconds
when taking away 5W, 7.5w and 10W devices.
3.3.5: When the input voltage is 5V, 9V, 12V, 15V, 5W, 7.5w, and 10W are fully charged, the white light is always on.
3.3.6: The charging indicator of Apple watch indicates that it will be on for 3S and then go off, while the LED
will be always on during charging, so there may be intervals during charging. Depending on the type of
Apple watch, the LED may go off when the charge is 95% to 100%.
3.2.7: The LED indicator goes off when the Air Pods are charging, causing a break of about 2 minutes.
4. Function instructions
4.1 Product connection diagram 1
4.2 Product and equipment charging diagram 2
Note: the phone should be positioned at the center point of ST-X3TWCPM & ST-X3TWCPS. If the phone is