User Manual

4 1-800-810-WIRE • www.sargentlock.com • A7373C
Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
03/31/14
KP Series
Keypad Mortise Lock
General Description
The SARGENT KP Series Mortise Lock is designed for areas which require stand alone
authorized entry. It is a self-contained microprocessor-controlled keypad with non-volatile memory.
The keypad holds a total of 100 different user codes. User codes 01, 02 and 03 are utilized for
Master Code, Emergency Code and Supervisory Code, respectively.
This motorized 8200 mortise lock is operated by four (4) “C” alkaline batteries.
SARGENT mortise locks are designed with quality components to provide high security,
performance and durability.
Specifications
• Latchbolt - Stainless Steel
• Deadbolt - Stainless Steel
• Guardbolt - Stainless Steel, non handed
• Handed - Easily field reversible without
disassembling the lock body
• Case - 12 gauge heavy duty wrought steel
• Outside lever controlled by keypad
• Inside lever retracts latchbolt and deadbolt
3
2
Features
4
• Non-volatile memory
• Motor driven, battery operated mortise lock
• Battery operated with 4 (each) “C” Alkaline
• Low battery alert – 4 chirps after code entry
• Option Code available to sound horn every
time keypad is pressed
• External remote “request to enter” connector
requires wire harness (52-2071)
• External battery input connector included to
power unit in event of battery failure
• All programming done at keypad
• Deadbolt switch inside mortise lock allows
Emergency Code and Master Code users to
gain entry when deadbolt is thrown*
• Operates utilizing any two to six digits
per code. Digits may be repeated and
codes may start with zero
• Adjustable unlock time
• Entry of three wrong User Codes
disables all codes for ten seconds.
Green LED flashes.
• Piezo horn can be heard with each
keystroke or turned off by Master or
Supervisory Code
• Last 15 transactions can be output to
printer via Data Transfer Device (DTD)
• 100 users total: one Master Code, one
Emergency Code, one Supervisory
Code, with the rest being standard
codes, passage codes, or one time
only codes
• Locks furnished for 1 3/4” doors. Can
be furnished for other door sizes upon
request. (Consult factory)
• UL Listed (3 hr.)
• Accepts size 41(standard) and 42
(removable core) SARGENT mortise
cylinders (KP8276 and KP8278)
• Key retracts latchbolt (KP8276 and
KP8278)
* PHR-prefix locks will not allow Emergency or Master Code users entry when deadbolt is thrown.
Entry is through key cylinder override only.