KP KP Series Keypad Mortise Lock Installation & Programming Instructions A7373C 03/14 Copyright 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Table of Contents 1 1 Warning ....................................................................................3 2 General Description..................................................................4 3 Specifications...........................................................................4 4 Features....................................................................................5 5 Parts Breakdown......................................................................
KP Series Keypad Mortise Lock 2 General Description The SARGENT KP Series Mortise Lock is designed for areas which require stand alone authorized entry. It is a self-contained microprocessor-controlled keypad with non-volatile memory. The keypad holds a total of 100 different user codes. User codes 01, 02 and 03 are utilized for Master Code, Emergency Code and Supervisory Code, respectively. This motorized 8200 mortise lock is operated by four (4) “C” alkaline batteries.
KP Series Keypad Mortise Lock Features (continued) 4 KP8276 • • KP8278 Deadbolt function Cylinder override provided • • KP8277 • • Deadbolt function No cylinder override KP8279 Cylinder override provided No deadbolt function • • No cylinder override No deadbolt function Keypad Tactile keypad made of Ultraviolet stable material LED’s indicate valid or invalid entries Green LED indicates unlocked.
03/31/14 Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. KP Series Keypad Mortise Lock 5 6 Parts Breakdown KP Series Parts List 3 2 14 16 25 1 8 4 6 10 7 Inside of Door 1-800-810-WIRE • www.sargentlock.
KP Series Keypad Mortise Lock Parts Breakdown (Continued) Req. Description 1 01-0803 Battery Alkaline (“C” cell) 4 2 3 4 5 6 01-1119 01-0297 01-1157 01-0440 81-0467 81-0468 81-0490 81-0470 81-0471 81-4648 81-0447 81-0489 81-0513 81-0445 01-1472 01-1174 #8-32 x 1-1/2 Flat Head Screw Security Socket Screw Key (1/8) #8-32 x 1-1/4 Phillips Pan Head Screw Flat Washer Inside Lever (L.H.) A” Design Inside Lever (R.H.
KP Series Keypad Mortise Lock 6 Installation Instructions Step #1 – Verify Hand and Bevel of Door A. Verify Hand and Bevel of Door Stand on outside/locked side of door when determining the door hand LH LHRB Left Hand Hinges Left Open Inward RH Left Hand Reverse Bevel Hinges Left Open Outward Right Hand Hinges Right Open Inward RHRB Right Hand Reverse Bevel Hinges Right Open Outward Fig. 1A B.
KP Series Keypad Mortise Lock Step #2 – Verify Hand and Bevel of Door A. Reverse Lock Hand Red surface of locking piece must face the outside/locked side of door. To rotate locking piece (Fig. 2A): 1. Position lock body with red surface of locking piece visible. 2. Insert blade type screwdriver into locking piece slot to rotate locking piece toward back of lock body. 3. Rotate the locking piece 180° until RED surface is on opposite side. Note: Red indicates locked side (outside).
KP Series Keypad Mortise Lock Step #3 – Install Lock Body Inside of Door 1. Insert lock body into mortised cutout (Fig. 3A). 03/31/14 Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. Fig. 3A 2. Hold lock body loosely in place with (2) lock body screws. Note: Do not completely tighten screws at this time.
KP Series Keypad Mortise Lock Step #4 – Exterior Door Options A. Fire Stop Plate (P/N 53-0033) Fire-rated doors require a fire stop plate on the outside of the door (Fig. 4A). 1. Drill (2) 1/8” x 1-1/4” deep holes in the door if not already present. Ribbon Cable Hole Refer to template for fire-stop prep locations. 2. Attach with flap up and out using (2) #8 x 1/2” self-tapping screws for wood and metal doors. Slot 7/8” Fig.
03/31/14 Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. KP Series Keypad Mortise Lock Step #6 – Install Outside Escutcheon and Lever Assembly Install Outside Lever Assembly 12 1-800-810-WIRE • www.sargentlock.
1-800-810-WIRE • www.sargentlock.com • A7373C 13 03/31/14 Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
03/31/14 Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. KP Series Keypad Mortise Lock Step #8 – Inside Lever Installation 14 1-800-810-WIRE • www.sargentlock.
1-800-810-WIRE • www.sargentlock.com • A7373C 15 03/31/14 Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
03/31/14 Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. KP Series Keypad Mortise Lock Step #9 – KP8276 and KP8278 Only - Install Cylinder Position cylinder so that the SARGENT logo is right-side up. Correct 16 1-800-810-WIRE • www.sargentlock.
Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited. Step #11 – Battery Installation 1-800-810-WIRE • www.sargentlock.
KP Series Keypad Mortise Lock 7 Operational Check • • • • • Place key into cylinder and rotate key. The key will retract the latchbolt. If the deadbolt is thrown, the key will retract both the deadbolt and the latchbolt. Inside handle lever retracts latchbolt and (if provided). Enter 1234* to unlock outside lever handle and retract latchbolt and deadbolt (if provided).
KP Series Keypad Mortise Lock This Keypad Mortise Lock has 99 User Codes available for programming purposes. • The Master Code is always User “01”. The Master Code assigns the Emergency and Supervisory Codes. It is also used for programming and will override the deadbolt*. Users are deleted through the Master Programming Code only. • The Emergency Code is always User “02”. The Emergency Code will override the deadbolt* in the mortise lock and has an unlock time of 10 seconds.
KP Series Keypad Mortise Lock All of the following procedures start with 99# (continued). If after the last “*” is depressed, the yellow LED does not go out, depress “*” once more. To Enter a Passage (Maintained Mode) Code: When Passage Mode is used, the same User Code must be used to re-lock the lock.
KP Series Keypad Mortise Lock All of the following procedures start with 99# (continued). If after the last “*” is depressed, the yellow LED does not go out, depress “*” once more. To Interrogate Transaction Log: • Supervisory or Master Code* (Yellow LED Begins to Blink Slowly) • 70# 0# 0# (Yellow LED Blinks Slowly) Seq User Trans 1 001 003 Hold an infrared printer up to the red infrared LED (as shown). A Data Transfer Device (DTD) can be used to download information from the keypad to a printout.
KP Series Keypad Mortise Lock Transaction Log To output the last 15 entries, enter 99 # Supervisory or Master Code * 70 # 0 # 0 # **. Note: Seq. # 1 is the programming request to output the entries. Sequence numbers 2-6 are the actual entries.
SARGENT Manufacturing Company 100 Sargent Drive New Haven, CT 06511 USA 800-810-WIRE (9473) • www.sargentlock.com Founded in the early 1800s, SARGENT® is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications. The company’s customer base includes commercial construction, institutional, and industrial markets.
