User Manual
7
TENTH
Copyright © 2009-2011, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission
of Sargent Manufacturing Company is prohibited.
A6701L
11-30-11
INSTALL GUIDES, COVERS AND END CAP
Top case cover
Rod guide
Chassis cover
Bottom case cover
End cap
1. Conrm operation of exit device. Adjust rods as needed.
2. Install top, bottom and center chassis covers as shown.
3. Install end cap as shown.
4. Install top and bottom rod guides at center of rod. Rod must oat freely in guide
without rubbing.
5. For doors over 96": Install two (2) top rod guides equally spaced between the
top case and chassis cover. Rod must float freely in guides.