Degree Key System ™ Technical Manual Copyright © 2013-2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Table of Contents Degree™ Key System Technical Manual Table of Contents 90726:E 4/30/14 Copyright © 2013-2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. The Degree™ Advantage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 DG1 Key Cuts . . . . . . . . . . .
The Degree™ Advantage Degree™ Key System Technical Manual The Degree Key System The patented Degree system from SARGENT provides the right level of security for each opening in your facility. Three levels of ANSI/ BHMA Grade 1 protection, from patented keyway to UL437 certified, secures every opening. A common key for all three levels of security enhances key control and simplifies administrative procedures. Key blanks are controlled through authorized distribution and geographical protection is available.
DG1 Key Cuts Degree™ Key System Technical Manual DG1 cuts from Bow to Tip .170±.001TYP. .2440±.0025 .271±.0015 (1) 90° TYP. .241±.0015 (2) .211±.0015 (3) .181±.0015 (4) .151±.0015 (5) .121±.002 (6) (.307) .054±.001 1 90726:E 4/30/14 Copyright © 2013-2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
DG2 & DG3 Key Cuts Degree™ Key System Technical Manual DG2 DG3 cuts R C R L L 20° C 20° .170 ±.001TYP. .259±.001 (1) .2440±.0025 .229±.001 (2) .199±.001 (3) .169±.001 (4) .139±.001 (5) .109±.001 (6) 86° TYP. (.307) REFERENCE LINE BOTTOM OF KEY 1 2 3 4 5 6 Dimensions shown are to theoretical intersection Size # Angle L DG-0111 1 C DG-0121 R 2 3 4 5 6 Part No.
Pinning Formula Degree™ Key System Technical Manual Fixed Core Cylinders - All 6 Chambers Large Format Interchangeable Cores (Chambers 1-2-5-6) Large Format Interchangeable Core Control Chambers (Chambers 3 and 4 Only) Non-LFIC LFIC Driver Pin (DP) 10 MINUS Plug Total Master Wafer (MW) Pin = Deepest Minus Shallowest Operating Cut Example Master Key 1 2 3 4 6 4 Change Key 3 4 5 2 2 2 Driver Pin (DP) 7 6 5 6 4 6 Master Wafer (MW) 2 2 2 2 4 2 Bottom Pin (BP) 1 2 3 2 2 2
Construction Master Keying (21- Option) Degree™ Key System Technical Manual Construction Master Keying (Lost/Wafer Design) for DG1-, DG2- & DG3SARGENT Degree cylinders when master keyed are offered with the convenience of construction keying when specified with the 21- option. This is not recommended with DG3 key systems or any system where strict key control and management is enforced. Construction keying simplifies the process when the building gets turned over.
Visual Key Control Tamper Proof Packaging Degree™ Key System Technical Manual Visual Key Control (Stamping) To allow for easier key and cylinder identification, SARGENT offers permanent stamping of keys and/or optional cylinder concealed stamping with industry standard alpha-numeric key set symbols. All DG keys are stamped with key set symbol and “DO NOT DUPLICATE” as standard.
Degree Pin Kits Degree™ Key System Technical Manual 437 DG1 Standard Pinning Kit The 437 DG1 Kit is used to pin DG1 fixed and LFIC cylinders. The heavy duty steel kit prevents pins from mixing.
Cylinder Parts: DG1-34 Rim/ DG1-40 Series Mortise Degree™ Key System Technical Manual DG1-34 Rim/ DG1-40 Series Mortise Cylinder Parts Item 1 Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. Part Number Plug 2 90726:E 4/30/14 Copyright © 2013-2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Cylinder Parts: DG2-34 Rim/ DG2-40 Series Mortise Degree™ Key System Technical Manual DG2-34 Rim / DG2-40 Series Mortise Cylinder Parts 1 Plug 2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 18 19 20 Cylinder Shell Chisel Tipped Bottom Pin Conical Bottom Pin Master Wafer Driver Pin Compression Spring Slider C6M6 Slider Spring Sidebar Spring Sidebar Cam Screw Retainer Tailpiece Retainer Tailpiece Spring Cover Standard Connecting Screws Rim Cylinder Back Plate Part Number DG-0191 DG-0411 DG-0412 DG-0413 DG-0414 D
Cylinder Parts: DG3-34 Rim/ DG3-40 Series Mortise Degree™ Key System Technical Manual DG3-34 Rim / DG3-40 Series Mortise Cylinder Parts Item 1 90726:E 4/30/14 Copyright © 2013-2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Cylinder Parts: DG1-LFIC Cores Degree™ Key System Technical Manual DG1 LFIC Cores Description Part Number Comment 1 Plug DG-0200 Plug finishes: 04, 15 2 Cylinder Shell DG-0290 Shell finishes: 04, 15 3 Control Sleeve DG-0215 4 Conical Bottom Pin See Page 2 and 3 5 Master Wafer See Page 2 and 3 6 Control Pin See Page 2 and 3 7 Driver Pin See Page 2 and 3 8 Compression Spring DG-0097 9 Plug Retainer DG-0090 10 Sidebar Spring DG-0059 11 Sidebar DG-0056 12 Spring Cover DG-
Cylinder Parts: DG2-LFIC Cores Degree™ Key System Technical Manual DG2 LFIC Cores Item Description Part Number Comment 1 Plug DG-0201 Plug finishes: 04, 15 2 Cylinder Shell DG-0291 Shell finishes: 04, 15 3 Control Sleeve DG-0216 4 Chisel Tipped Bottom Pin See Page 2 and 3 In pin chambers 1 through 5 5 Conical Bottom Pin See Page 2 and 3 In pin chamber 6 only 6 Master Wafer See Page 2 and 3 7 Control Pin See Page 2 and 3 8 Driver Pin See Page 2 and 3 DG-0097 9 Compression Spr
Cylinder Parts: DG3-LFIC Cores Degree™ Key System Technical Manual DG3 LFIC Cores Description Part Number Comment 1 Plug DG-2901 Plug finishes: 04, 15 2 Cylinder Shell DG-0292 Shell finishes: 04, 15 3 Control Sleeve DG-0216 4 Chisel Tipped Bottom Pin See Page 2 and 3 In pin chambers 1 through 5 5 Conical Bottom Pin See Page 2 and 3 In pin chamber 6 only 6 Master Wafer See Page 2 and 3 7 Control Pin See Page 2 and 3 8 Driver Pin See Page 2 and 3 DG-0097 9 Compression Spring 1
Cylinder Parts: DG1 Bored, Auxiliary & Integralock Degree™ Key System Technical Manual 13 6 5 4 9 8 3 2 7 12 11 10 1 DG1 Bored, Auxiliary, & Integralock Cylinder Parts 90726:E 4/30/14 Copyright © 2013-2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
Cylinder Parts: DG2 Bored, Auxiliary & Integralock Degree™ Key System Technical Manual 18 7 6 4 14 5 13 3 2 12 17 10 11 16 9 8 15 1 DG2 Bored, Auxiliary, & Integralock Cylinder Parts Part Number Where Used / Cylinder Length Plug with tailpiece retainer (item 12) DG-3062 6, 7, 8L, 10, 11, 6500, 7500 Line Cylinders (Lever Locks) Plug with roll pin DG-3072 7, 8, 9 Line Cylinders (Knob Locks) Plug DG-0166 460, 470, 480, 7500DB Series Deadbolt Cylinders Plug DG-0276 7600 Integralock Cylin
Cylinder Parts: DG3 Bored, Auxiliary & Integralock Degree™ Key System Technical Manual 18 7 6 4 14 5 13 3 2 12 17 10 11 16 9 8 15 1 DG3 Bored, Auxiliary, & Integralock Cylinder Parts Item Part Number Where Used / Cylinder Length Plug with tailpiece retainer (item 12) Description DG-3063 6, 7, 8L, 10, 11, 6500, 7500 Line Cylinders (Lever Locks) Plug with roll pin DG-3073 7, 8, 9 Line Cylinders (Knob Locks) Plug DG-3030 460, 470, 480, 7500DB Series Deadbolt Cylinders 1 90726:E 4/30/14
SARGENT Manufacturing Company 100 Sargent Drive New Haven, CT 06511 USA 800-727-5477 www.sargentlock.com Founded in the early 1800s, SARGENT® is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications. The company’s customer base includes commercial construction, institutional, and industrial markets.
