Manual

2
800-810-WIRE (9473) • www.sargentlock.com • A7884A
Alarmed Exit Devices AL-80 Series
5/15/08 Copyright © 2008 SARGENT Manufacturing. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing is prohibited.
1. Prepare door according to template and Alarmed Exit instruction sheet.
2. Verify cylinder (size 41) is installed in rail insert with collar prior to installing exit device on door.
Installation and
Orientation of
Cylinder
To Add or Remove Cylinder
1. Remove Insert Assembly from rail by sliding toward rail end.
Cylinder Orientation
2. Slide cylinder through collar into the insert as shown.
NOTE: Orientation of the cylinder.
Secure the cylinder with cylinder nut. Tighten firmly.
3. Operate cylinder and verify cam is operating switch properly.
SARGENT
SARGENT
Cylinder Installation
3
Collar
Cylinder nut
Side View. Battery holder not shown.
U
se caution not to damage wires
when installing cylinder nut.