Manualshelf

Hardware User guide

ManualsBrandsSARGENT ManualsSafety5800 & 12-5800 Alarmed Exit
1234
A7421B
A7421B
A
B
1. Assemble arm to closer with index mark on end of spindle 45° from axis of arm as illustrated below. Use washer and screw
to attach arm.
RIGHT HAND
ILLUSTRATED
C
Left hand door
Position of arm when
assembling to spindle
45°
Closer spindle,
washer and screw.
Right hand door
45°
Index mark
on spindle
Main
arm
Main
arm
Index mar
k
on spindle
Closer spindle,
washer and screw
.
With provided fasteners, secure closer body to door
with power adjustment away from hinge.
1431 (OD, ODB, HD, HDB ) DOUBLE EGRESS
PULL SIDE TRACK INSTALLATION INSTRUCTIONS
CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY
MAY RESULT IN INJURY OR DAMAGE
For assistance, contact SARGENT at 800-727-5477 or www.sargentlock.com
NOTE: AN AUXILIARY DOOR STOP IS REQUIRED
OR
Pre-drill - 3/32” holes for
self tapping screws or #16 drill for
#12-24 tap for machine screws
Drill and tap door and frame.
See page 4 for dimensions.
Optional mortise nuts
with through-bolts
Frame
Unreinforced door
Door stop
Mortise nut
Drill 3/8" dia.
Hole for mortise nut body.
Drill 1/4" dia. hole
for mounting screws
Copyright
©
2006, 2008, Sargent Manufacturing Company, an ASSA ABLOY
Group company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
Copyright
©
2006, 2008, Sargent Manufacturing Company, an ASSA ABLOY
Group company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.

Summary of content (4 pages)