User Manual

WITH POWER OFF, CONNECT WIRES AND INSTALL CLOSER INTO PREPARED FRAME WITH
SPRING ADJUSTMENT SCREW AWAY FROM HINGE. (268 CSPS DOOR CLOSER SHOWN)
INSERT ARM ROLLER INTO TRACK THRU
CUTOUT AND TEMPORARILY LET ARM
LAY ON A TRACK.
VERIFY THE HAND OF THE CLOSER BEFORE INSTALLING. REFERRING TO THE STAMPING ON THE CLOSER END CAP AS SHOWN
A
ASSEMBLY OF ARM TO DOOR
CLOSER SPINDLE
1. USING 1/8" ALLEN WRENCH, TURN LATCHING
SPEED AND DOOR CLOSING SPEED VALVES
(SEE FIGURE 1) CLOCKWISE UNTIL THEY STOP.
DO NOT FORCE VALVES.
2. USING ADJUSTABLE WRENCH, ROTATE
DOOR CLOSER SPINDLE (SEE FIGURE 1)
90° CLOCKWISE FOR LEFT HAND DOOR AND
COUNTER CLOCKWISE FOR RIGHT HAND DOOR.
3. OPEN DOOR APPROXIMATELY 50° WITH THE
DOOR CLOSER SPINDLE NOW STATIONARY,
MOVE THE END OF THE ARM TO THE SPINDLE
END UNTIL SQUARE HOLE IN THE ARM LINES
UP WITH THE SPINDLE END SQUARE (AS SHOWN).
PUSH ARM UP INTO POSITION ON THE SPINDLE
AND SECURE WITH SECURITY SCREW
AND WASHER.
4. RETURN LATCHING AND DOOR SPEED
VALVES TO NORMAL POSITION
L
EFT
HAND DOOR
R
IGHT
HAND DOOR
P
ULL
HINGE SIDE
PULL
H
INGE SIDE
S
TOP (PUSH) SIDE STOP (PUSH) SIDE
268/269 CSPS/CSPD DOOR CLOSERS ARE HANDED AND SHOULD BE SAME HAND AS DOOR
RED– NORMALLY CLOSED
BLUE– NORMALLY OPEN
BLACK– COMMON
FROM DOOR
POSITION SWITCH
TO MONITORING SYSTEM
M
A
I
N
A
R
M
INDEX MARK
ON SPINDLE
R.H. SHOWN VIEW
LOOKING UP
OPTIONAL: 268 CSPD
DOOR CLOSER HAS TWO
SETS OF WIRES
4 EACH
12-24 X 5/8" MS
(PROVIDED)
B
D
E
DATE CODE:
MONTH AND YEAR
MODEL NUMBER
AND HANDING
When using the optional
circuit tester, refer to page 3
for instructions
C
INSTALL TRACK IN DOOR AS SHOWN USING
TAMPER PROOF SECURITY SCREWS
PROVIDED.
HINGE EDGE
OF DOOR
C
UTOUT AWAY
FROM HINGES
1
268, 269 (CSPS OR CSPD)
SECURITY OVERHEAD CONCEALED DOOR CLOSER
WITH INTEGRATED SINGLE OR DOUBLE SWITCH
CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE.
FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 • www.sargentlock.com
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A7326C 06-15-09