Owner`s manual

47
Adirondack Spas®
OWNER'S MANUAL
CONTROL PANEL ICON IDENTIFICATION
SE/LE MODEL OPERATIONS TROUBLE SHOOTING GUIDE
PROBLEM PROBABLE CAUSE SOLUTIONS
Spa jets/
pump(s)
turn on
automatically
Normal purge filtration cycle
"Ice Mode" (LE)
"42˚F Too Cold (SE)
No action necessary
No action necessary
Not able to
operate main
control panel
Panel may have malfunctioned
Screen may be in "Lock" mode (SE)
Contact your dealer
See page 26 (SE)
Water does
not clear up
Bad water chemistry
Dirty filter cartridges
Ozone generator not operating
Bromine/chlorine residual levels
too low
Balance water
Clean or replace filters
Locate ozone generator, a
purple ultraviolet light should be
illuminating in the ozone generator
Adjust Bromine/chlorine levels.
Shock if necessary. May have to
replace water
SE Model
LE Model
Note: The Keene, Champlain and Caroga models have only one jet pump button on the panel.