Owner`s manual

33
Adirondack Spas®
OWNER'S MANUAL
OPERATING THE HYDRO PUMPS ON LE MODELS
Jets 1 Button
Activates the hydro jet pump #1 for maximum hydrotherapy jet action. Press the Jets 1
button once for low speed, again for high speed and again to turn the pump off. When the
pump is activated the indicator above the Jets 1 button will light up. The pump will turn off
automatically after 15 minutes on high speed and 4 hours on low speed.
Jets 2 Button
Activates the hydro jet pump #2 for maximum hydrotherapy jet action. Press the Jets 2 button
once for high speed and again to turn the pump off. When the pump is activated the indicator
above the Jets 2 button will light up. The pump will turn off automatically after 15 minutes on
high speed.
Note: The spa light will begin flashing 15 seconds before the pumps shut off as a reminder,
thatthepump(s)cycleisabouttoend.
Note: The Keene, Champlain and Caroga models have only one jet pump button on the
panel.
Note: Adirondack Spas® are designed for maximum heat retention. The unit is not designed
to cool water. If the set or desired temperature is below that of the ambient temperature, the
unit will not be able to achieve this demand. Depending on the desired temperature, it may be
necessary to add cool water to the unit to lower your spas water temperature.
Light Button - Saratoga Lighting System
The Saratoga Lighting System is designed to give the user multiple color options and styles.
To turn on the system, press the light button. The spa will illuminate with one of it's many
combinations and locations. As you continue to press the light button, different color
combinations and illuminating styles, such as solid, fading or pulsating color will function.
You must press the light button through each function before it reaches the off mode. If the
light is left on it will automatically be turned off by the control system after four hours of
continuous operation.
Optional Splash™ Lighting
The Splash™ Lighting is used in conjunction with the Saratoga Lighting system and increases
the illumination location. See the operational features and directions located in Splash™ box, or
contact your dealer for instructions.