Owner`s manual

Adirondack Spas®

OWNER'S MANUAL

INITIAL OPERATING INSTRUCTIONS

Start-Up and Refill Procedures

Your Adirondack Spas® model has been tested at the manufacturing plant to ensure that all

of the spa functions operate. During the test procedure, a small amount of water may have

remained in the spa plumbing. Through the shipping process water may have spotted the spa

shell. You may need to wipe down the shell with a soft cloth. Please read and follow the start-up

instructions to ensure a successful start-up or refill.

• Inspect and clean spa shell of any debris

•Donotturnpowerontospaunlessfilledwithwatertoappropriatelevel(SeePage

21-22).Thespapackmustneverbeoperatedwithoutwaterinthespa;serious

damagetotheheaterand/orpump(s)mayresult.

•Donotfillspawithwaterbeforecheckingtheitemsbelow(belowitemsmaybecome

looseintransit):

• Do not fill spa with hot water. This may cause a false error code to the temperature sensor.

A. Hand tighten unions at the pumps

B. Tighten drain valve

Note: The Drain Valve is left open for

shipping and must be closed before filling spa.

C . Tighten unions on heater

(LE) (SE)