Instruction Manual

Assembly Instrucons
42881001 2 Wire Drawer Unit
ATTENTION: While assembling secons D and E and using a mallet, plasc chips may be released,
this is normal and should not be of concern. Place either cardboard or a blanket on the floor so
that both the floor and the drawer unit will be protected during assembly.
Tool Required
Screw Driver
(Not Provided)
Mallet Required
(Not Provided)
A X 1
B X 1 C X 2
D X 2 E X 2
F X 1
G X 4
H X 4
I X 4 J X 4
Step 1
Step 2
Step 3 Step 4