User Manual

5 Quick Start Guide
a.
Install a 9V battery. Gently slide out the battery cover in
the direction of the arrow at the back of unit. Insert the
battery with the “+” positive terminal lined up with the
“+” indicator on the battery compartment.
b.
Connect your microphones to the XLR inputs or 3.5mm
inputs, or connect guitars to the 1/4" (6.35mm) inputs.
c.
Set the M/S switch
When recording on one channel, switch to the mono
(M) setting. The signal will be sent to both left and right
channels.
When recording on two channels, switch to the stereo
(S) setting. The level of each channel can be controlled
individually.
d.
Connect the SmartRig+ UC to the USB Type-C interface
of your devices.
e.
When connect to USB Type-C device, please download
professional recording APP which support real-time
input/output pass-through and install them on your
USB Type-C device.
f.
Turn on th e SmartRig + UC. Sl ide th e powe r swi tch to
the ON position and the green indicator is on.
g.
If your microphone needs phantom power, please
slide the power switch to the +48V position.