User Manual


M/S switch
Select mono/stereo output mode
When recording on one channel, use the mono (M)
setting. The signal will be sent to both left and right
channels.
When recording on two channels, use the stereo (S)
setting. The level of each channel can be controlled
individually.

and

Control Knobs
Adjust the signal level of
each channel to the optimum
recording levels.
Knob

controls the volume
of input group 1 and knob

is for input group 2.

REC/PLAY Switch
Select REC to monitor audio
directly from the microphone
or audio sources while
recording.
Select PLAY to monitor
playback audio from the USB
Type-C devices.

LED Indicator
When turn on the SmartRig+,
the green indicator is on.