User Manual

Blink500 RXDi
Transmission Type 2.4GHz Digital Frequency
Modulation GFSK
Operating Range Up to 164' (50m)
Audio Output Connector MFi Certified Lightning Connector
Power Requirement Supplied by iOS Device
Built-in Battery Life Approx. 6 hours
Antenna PIFA Antenna
Weight Approx. 11g (0.38oz)
Dimensions 76×16.5×11mm
Operating Temperature 0°C to 50°C
Storage Temperature –20°C to +55°C
Blink500 RXUC
Transmission Type 2.4GHz Digital Frequency
Modulation GFSK
Operating Range Up to 164' (50m)
Audio Output Connector USB-C Connector
Power Requirements Supplied by USB-C Devices
Built-in Battery Life Approx. 6 hours
Antenna PIFA Antenna
Weight Approx. 10.5g (0.37oz)
Dimensions 76×16.5×11mm
Operating Temperature 0°C to 50°C
Storage Temperature –20°C to +55°C
3. Insert the pairing pin into the pairing pin-hole of RXDi
or RXUC, press hard and the pair indicator should be
quick flashing at every 0.5s. Press both the “+”and “-”
button of transmitter TX simultaneously within 10
seconds.
4. The kit will be paired when the RX pair indicator is solid
blue and the TX pair indicator is flash slowly.
Note: To pair the second transmitter TX, just repeat the
step 3 and 4.
5. You are ready to record.
Specification