Instruction Manual

6) The pistol will fire one shot with every squeeze of
the trigger, until the magazine is empty.
7) When the magazine is empty, the slide will stay
open. You may remove the magazine and reload
the magazine while the slide is locked open by the
slide stop. See Fig 25
8) Insert the loaded magazine into the pistol. You
may either press down on the slide stop or pull
slightly back on the slide and release it. The slide
will close and reload the chamber. The pistol will
then be ready to FIRE. See Fig 26A and 268
If you fired the pistol and wish to stop firing,
immediately push the trigger block safety to the
"on" or "safe" position. Then follow the unloading
instructions above while keeping the muzzle
pointed in a safe direction.
DIRECTIONS FOR DISASSEMBLY /
RE-ASSEMBLY OF THE PISTOL:
1) Make sure the pistol is unloaded (FOLLOW
UNLOADING INSTRUCTIONS) and pointed in a
safe direction.
2) Pull the hammer back to the full cock position.
See Fig 27
3) Identify the two takedown marks behind the
safety lever on the left side of the slide and frame.
Pull the slide back slightly and line up the two
marks. See Fig 28.
HINT: Use the rearsight for leverage when lining
up the marks.