Instruction Manual

YOUR PISTOL IS NOW LOADED AND READY TO
FIRE, IF THE SAFETY IS MOVED TO THE “OFF”
or “FIRE” POSITION AND THE TRIGGER IS
PULLED THE GUN WILL FIRE .....
TO UNLOAD:
Make Sure the Safety is in the "ON" or “SAFE”
position and the gun is pointed in a safe direc-
tion......
1) Press the magazine release button and remove
the magazine from the pistol. See Fig 17
The pistol does not incorporate a magazine discon-
nect safety, so the pistol may be fired with the
magazine removed from the pistol .....
Removing the magazine does not unload the
chamber. If a cartridge is in the chamber the pistol
can fire with the magazine removed .....
2) To unload the chamber, keep your finger OUT of
the trigger guard and OFF THE TRIGGER and
move the safety to the “off” or "fire” position....
THE PISTOL CAN NOW FIRE IF YOU PULL THE
TRIGGER, SO BE VERY CAREFUL! Make sure
your fingers are not in the trigger guard. Hold the
pistol grip with one hand, grasp the rear slide
serrations as far back as possible with your other
hand. Pull the slide rearward and eject the
cartridge in the chamber. See Fig 18
3) Engage the slide stop, so that the slide stays in
the rearward position. See Fig 19
4) Visually check the chamber to insure that there
is no cartridge in the chamber. See Fig 20
5) To unload the magazine you press the top ca
tridge in the magazine down forward and out,
repeat this procedure until the magazine is
completely unloaded. See Fig 21