Instruction Manual

Make sure the pistol is pointed in a safe direction and the trigger block safety
is engaged at all times while loading and unloading. NEVER allow your fingers
or other objects to contact the trigger while loading or unloading.
Do not disengage the trigger block safety until you are ready to fire and have
the gun pointed safely downrange.
TO LOAD THE MAGAZINE:
1) Press the magazine release button and remove
the magazine from the pistol. See Fig 11
2) Load the cartridges into the magazine. Do NOT
force the cartridges into the magazine. Do NOT
overload the magazine. See Fig 12
3) Push the magazine up into the pistol firmly until
the magazine catch locks it into place. Do NOT slam
the magazine into place. See Fig 13
TO LOAD THE CHAMBER:
MAKE SURE YOUR FINGERS ARE OFF THE
TRIGGER AND AWAY FROM THE TRIGGER
GUARD
1) With the gun pointed in a safe direction. Move
safety to the “off” or “fire” position if the hammer is
in the down position or resting position. If the
hammer is in the fully cocked position you may
bypass step one.
2) Hold the pistol grip with one hand, grasp the rear
slide serrations as far back as possible with your
other hand. Pull the slide rearward until it cannot
travel any further. See Fig 14
3) Release the slide and allow it to go forward into
the closed position (as powdered by the recoil
spring...Do not help / push the slide forward). The
slide will automatically take a cartridge from the
magazine and load it into the chamber.
See Fig 15
4) Do NOT put your fingers or hand in front of the
barrel.
5) Move the safety to the “on” or “safe” position or
fully up IMMEDIATELY!!!!!
See Fig 16
LOADING AND UNLOADING YOUR PISTOL