User's Manual

STR 2000 Series Transceiver Programming Manual
Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: [phone] Fax: [phone] www.Sapling-Inc.com
Once programming mode has been entered, the number
“01” will appear in the far left position (see diagram).
This prompt allows you to set the year. Use the “Set
Minute” button to scroll from “00-99” on the display
and set the year.
Press the “Set Hour” button to advance to option 2. A
“02” will appear on the left side of the LED display.
This prompt allows you to set the month. Use the
“Set Minute” button to scroll between “01-12”.
Press the “Set Hour” button to advance to option 3. A
“03” will appear on the left side of the LED display.
This prompt allows you to set the day. Use the “Set
Minute” button to scroll between “01-31”.
Page 2
Pressing the “Set Hour” button will advance to option 04.
A “04” will appear on the left of the LED display. This
option shows the user if daylight savings time is en-
abled (Left Digit 1 Enabled, 0 Disabled) and if the
date is in the summer months (Right Digit 1 Summer,
0 Winter).
Left Digit Right Digit