User's Manual

SAL-2 Series Wireless Clock Installation Manual (V1)
Sapling, Inc. 1633 Republic Road Huntingdon Valley, PA 19006 Phone: [phone] Fax: [phone] www.Sapling-Inc.com
Page 2
1. Connect the wiring as shown on the wiring diagram (110V or 24V
ONLY).
2. Mount both plastic anchors in the wall.
3. Insert the sheet metal screws (#10) through the mounting bracket into
the plastic anchors.
4. Plug the connector into the movement (110V or 24V ONLY).
5. Hang the clock on the mounting bracket.
6. Put the screw (4mm) through the hole on the top of the clock into the
hole at the top of the mounting bracket.
INSTRUCTIONS
12” CLOCK 16” CLOCK
Wall Mount Installation
24 Volt/110 volt options shown in diagrams
STANDARD SINGLE
GANG BOX
PLUG CONNECTOR
INTO BOTTOM OF
MOVEMENT
STANDARD SINGLE
GANG BOX
PLUG CONNECTOR
INTO BOTTOM OF
MOVEMENT