User's Manual

The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
+1 215.322.6063 P.
+1 215.322.8498 F.
www.sapling-inc.com
41
FCC Statements
The Federal Communications Commission (FCC) wants you to know:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protraction against harmful interference in a commercial installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communcations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determioned by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician.
FCC Warnings:
Modifications not expressly approved by the manufacturer could void the user authority to operate the
equipment under FCC Rules.
For the 900 MHz Model, FCC ID Number: R73LPA1
This equipment must be installed by professional installers only. For precautionary measures, the FCC
requires a minimum distance of 3 cm form the clock to constant human physical exposure. The antenna
has a maximum gain of 5.14 dB.
For the 2.4 GHz Model, FCC ID Number: R73MOD-24G-1
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5.78
cm from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter.
Support
Support