User's Manual

The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
+1 215.322.6063 P.
+1 215.322.8498 F.
www.sapling-inc.com
20
Option 30 - Auxiliary Input Control:
This option allows the user to choose which time protocol input the clock
will receive. Press the bottom button to scroll between “d” and “01-09.”
See Table 4 below for the Auxiliary Input Control settings. Note: For an
explanation of each time protocol, refer to page 17.
If the option is set to “d” (disable) or “01-08,” when the top button is
pressed, the user will be taken to option 40. If option “09” (Once a Day
Pulse) is selected, the user will be taken to option “31-33” to configure
the Once a Day Pulse settings.
Option 31 - Once a Day Pulse Input - Hour:
If the Once a Day Pulse (Option 9) setting is selected in Option 30, a user
will need to set the hour for relay closure. Press the bottom button to
scroll between “00-23.”
Once a user selects the Once a Day Pulse Input - Hour, press the top
button to continue on to Option “32.”
Option 32 - Once a Day Pulse Input - Minutes:
If the Once a Day Pulse (Option 9) setting is selected in Option 30, a user
will need to set the minutes for relay closure. Press the bottom button to
scroll between “00-59.”
Once a user selects the Once a Day Pulse Input - Minutes, press the top
button to continue on to Option “33.”
Option 33 - Once a Day Pulse Input - Seconds:
If the Once a Day Pulse (Option 9) setting is selected in Option 30, a user
will need to set the seconds for relay closure. Press the bottom button to
scroll between “00-59.”
Once a user selects the Once a Day Pulse Input - Seconds, press the top
button to continue on to Option “40.”
OPTION
SETTING
33 59
32 59
31 23
30 d
d - Disable Auxiliary Input 05 - 59 Minute Correction
01 - 58 Minute Correction (1) 06 - National Time/Rauland
02 - 58 Minute Correction (2) 07 - Dukane Digital
03 - 58 Minute Correction (3) 08 - Rauland Digital
04 - 58 Minute Correction (4) 09 - Once a Day Pulse
Table 4
Programming