User Manual

Page 4 of 7
Installed
The picture below shows the MOD-24G-1 RF module installed in a digital clock.
It shows the SBL-G3S-256-1R, the connectors to the rest of the Sapling Wireless
Clock System, and the FCC ID, and the Compliance Label.
SBL-G3S-256-1R
Antenna(s)
The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 5.78 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
MOD-24G-1
J2 RF MODULE
INTERFACE
The Sapling Company, Inc. 215.322.6063 P.
1633 Republic Road 215.322.8498 F.
Huntingdon Valley, PA 19006 www.sapling-inc.com
USA