Instruction Manual

2
3
4 5
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
8
4) Remove the template and insert the wall
anchors into the outer holes.
2) Locate the positions of the outer holes on
each mounting plate. Use a drill to create
each hole through the template.
Mounting a Zone Clock Pole
3) Skip this step if your clock is
battery-powered. Use a pencil to poke
through the template and find the position of
each inner hole. Mark each position on the
wall.
5) Skip this step if your clock is
battery-powered. Use the positions of
the marked holes to trace the location for
your double gang box. It is VERY important
that the holes on the gang box match
the positions of the marked holes on the
template.