Instruction Manual

The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
5
Configuring a Clock to be Used in a Zone Clock
IP-PoE Clocks
Wi-Fi Clocks
IP-PoE and Wi-Fi Systems (continued)
Clocks for IP-PoE and Wi-Fi Zone Clocks are configured by the user. EACH CLOCK MUST BE
CONFIGURED INDIVIDUALLY BY THE USER UNLESS PRESET SERVICE WAS ORDERED.
Consult the manual for instructions on how to log in to each clock. Once you have logged into the
clock, navigate to the following pages:
On an IP PoE clock, navigate to the Clock Settings tab.
1) Configure the Daylight Saving Time setting so that it matches the country of the clock’s
designated city. If you are unsure of the DST laws for a particular country, you can look them
up on the following website:
https://www.timeanddate.com/time/dst/events.html
2) When finished, press the Submit button at the bottom.
At this point, you may wish to attach a sticker or other temporary label to the clock which
lists the name of the configured city. This will help you identify the correct nameplate to
attach at the end of the installation.
On a Wi-Fi clock, press the General
Settings button, followed by the
Daylight Saving Time button.
1
2
1