Instruction Manual

15
16
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
15
15) Skip this if your clock is battery-powered or uses Power over Ethernet. Attach
the grounding wire to the green grounding screw. Once the wire is wrapped around the screw,
tighten the screw so that the grounding wire is held firmly between the screw head and the surface
of the pole.
Mounting a Zone Clock Pole
16) Run wiring or IP cables to the remaining clocks. Thread wiring through the white cable anchors
where applicable (this may have already been done for you, if it is a wire-powered system).
Details on how to power each clock and attach it to the housing can be found in the double-mount
portion of the clock manual for your synchronization system.