Instruction Manual

11
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
12
Mounting a Zone Clock Pole
11) Attach the housings to the sliding nuts on the zone clock pole. Use the black M4-0.5x10
screws and internal-tooth washers for each housing until each housing is attached. Round and
Digital housings require four screws and four washers per housing. Square clocks require six
screws and six washers per housing. For Round and Digital, use a screwdriver to remove the end
caps attached to the back of each housing.
REMOVE END CAP
REMOVE END CAP