Instruction Manual

9
8
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
10
Mounting a Zone Clock Pole
8) Skip this step if your clock is battery-powered. Thread wiring through the mounting
plate. If the wires are NOT Power over Ethernet, attach grounding wires to mounting plates using
green screws.
* Power wires should extend far enough from the gang box to reach the first clock.
9) Place the end-caps on the pole. Your pole may already have end-caps attached.
Electrical Wiring Network Cables