User manual

http://www.sapido.com.tw/ User Manual v1.0.0 16
Step 4-2. For getting IP manually in order to specify a Virtual Server, such as Print Server,
FTP Server and so on, please skip Obtain an IP address automatically and then select Use
the following IP address. And the following default setting of ADSL2/2+ Broadband Router
should be noted:
 IP Address: 192.168.1.10 (as your Print Server for example)
 Subnet Mask: 255.255.255.0
 Default Gateway: 192.168.1.1
Note: If you configure your computer’s IP Address manually, it needs to be on the same network segment.
For example:
 IP Address: 192.168.1.xxx (xxx can be any number between 2 and 253, but it can’t be
repeated, we use 100 to be the example.)
 Subnet Mask: 255.255.255.0
 Gateway: 192.168.1.1 (this is the IP address of ADSL2/2+ Broadband Router in Router
Mode)
 DNS: 192.168.1.1 (use ADSL2/2+ Broadband Router’s IP address or on your own choice)
Note: IP address and Default gateway cannot be the same.