User manual

http://www.sapido.com.tw/ User Manual v1.0.0 13
1.4 System Requirements
To begin with ADSL2/2+ Broadband Router, you must have the following minimum system
requirements. If your system can’t correspond to the following requirements, you might get
some unknown troubles on your system.
One Ethernet (10 BASE-T or 10/100 BASE-TX) network interface card.
PC and at least one web browser software installed (E.g.: Internet Explorer 5.0,
Netscape Navigator 7.x, Apple Safari 2.03 or higher version).
At lease one 802.11b, 802.11g, or 802.11n wireless adapter for wireless clients.
Recommended OS: Windows 2000, Windows XP, Windows Vista, Windows 7 / Linux.
1.5 WAN Network Plug and Play
 WAN Type auto-detection：
 When using Ethernet auto-connection:
 Auto-detection mode only applies on PPPoE, DHCP, PPTP and L2TP.
 Router will detect WAN type and load the settings from last time or display
corresponding page for user to input information.
 If there is no setting from user, the router will load the default settings.
If there is no setting from user, it will detect ISP and load corresponding settings.