User`s manual

Reference No T11112830801-RE
Report No T11112830801-RE
Page 16 /
50
6.3 TEST SETUP
The equipment under test was configured and operated in a manner to communicate
with WLAN continuously. EUT tends to maximize its emission characteristics in a typical
application for conducted and radiated emission measurement. The RF module plus
ancillary (stand alone unit) was evaluated as per table 2 of clause 7.1 of ETSI Final draft
ETSI EN 301 489-1
V1.8.1: 2008
. The transmitter was active during the conducted and
radiated emission measurements.
Software Used During the Test
Operating System
Windows XP
Program Sequence
Run ping.exe and link the auxiliary AP.
RF Management
Software
S/W provided applicant.
REMARK: During the test, no modification is made to the EUT to comply with Class B limit
levels.