User`s manual

Reference No T11112830801-RE

Report No T11112830801-RE

Page 13 /

4. INSTRUMENT AND CALIBRATION

4.1 MEASURING INSTRUMENT CALIBRATION

The measuring equipment, which was utilized in performing the tests documented herein,

has been calibrated in accordance with the manufacturer’s recommendations for utilizing

calibration equipment, which is traceable to recognized national standards.

5. FACILITIES AND ACCREDITATIONS

5.1 FACILITIES

All measurement facilities used to collect the measurement data are located at CCS

Tainan Lab.

No.8,Jiucengling, Xinhua Dist., Tainan City 712, Taiwan (R.O.C.)

The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI

C63.4 and CISPR Publication 22.

5.2 EQUIPMENT

Radiated emissions are measured with one or more of the following types of linearly

polarized antennas: tuned dipole, biconical, log periodic, bi-log, and/or ridged waveguide,

horn. Spectrum analyzers with preselectors and quasi-peak detectors are used to

perform radiated measurements.

Conducted emissions are measured with Line Impedance Stabilization Networks and

EMI Test Receivers.

Calibrated wideband preamplifiers, coaxial cables, and coaxial attenuators are also used

for making measurements.

All receiving equipment conforms to CISPR Publication 16-1, “Radio Interference

Measuring Apparatus and Measurement Methods.”