User`s manual

Compliance Certification Services Inc.
Report No：T11112830801-LV
Page 29 of 72
4.3.8 TABLE: Batteries
N
The tests of 4.3.8 are applicable only when appropriate battery
data is not available
Is it possible to install the battery in a reverse polarity position?
Non-rechargeable batteries Rechargeable batteries
Discharging Charging Discharging Reversed charging
Meas.
current
Manuf.
Specs.
Un-
intentional
charging
Meas.
current
Manuf.
Specs.
Meas.
current
Manuf.
Specs.
Meas.
current
Manuf.
Specs.
--
Test results: Verdict
- Chemical leaks
- Explosion of the battery
- Emission of flame or expulsion of molten metal
- Electric strength tests of equipment after completion of tests
Supplementary information:
4.5 TABLE: Thermal requirements
P
Supply voltage (V) .......................... : 12Vdc 12Vdc
⎯
Ambient T
min
(°C) ............................ :
-- --
⎯
Ambient T
max
(°C) ............................ :
-- --
⎯
Operating condition A : Tested with horizontal mode.
B : Tested with vertical mode.
C: Power adapter : I/P : 90V/60Hz with horizontal mode.
Maximum measured temperature T of part/at::
T (°C)
Allowed
T
max
(°C)
For EUT :
Operating condition :
A B
--
02. C291 60.6 59.8 85
03. L44 63.8 63.1 105
04. PCB near U25 68.5 68.7 105
05. PCB near U2 73.3 69.5 105
06. C293 53.2 50.7 85
07. U32 body 57.4 55.8 105
08. U33 body 54.7 53.2 105
09. U34 body 51.9 50.8 105
10. PCB near U11 62.2 58.5 105
11. PCB near U17 62.7 59.2 105
12. Plastic enclosure inside near U17 54.5 49.9 --
13. Plastic enclosure outside near U17 52.1 48.1 95
Tma 40.0 40.0 --